Welcome to Hunt N Stuff !!!!

12 (1Dz) Flo Fluorescent Orange Arrow Wraps

Be the first to review this product

Availability: In stock


Quick Overview

12 (1Dz) Flo Fluorescent Orange Arrow Wraps

This Wrap is a Flo Orange compared to my other listing that is for Standard Orange or Tangerine.      

 These wraps are lighter than other wraps being sold.

Don't get fooled by other sellers that are "sign companies" or selling cheap rolls of "wrap material" that is 5 or 6 mils thick. That affects the arrows front of center as well as flight.

 I build all my own arrows in our shop. I will only sell the best and lightest materials to my customers at a very competitive price.

12 (1Dz) Flo Fluorescent Orange Arrow Wraps

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

* Required Fields



ONE dozen Fluorescent Orange Arrow Wraps. 

Wraps are ONLY 4 mils thick and weigh about 2 grains per sq inch.

Beware of sellers on eBay that do not give you the mils or weight.

We had a secret shopper purchase other "Bargain" Wrap from eBay and weigh them.

Some were as high as 6 grains per inch.


Also we found some that were based on a water adhesive and not a permanent one.

You do not want the wraps coming off when you arrows get wet!!!!


These are a little higher than our regular wraps that are 1.2 grains per inch

but these are still the lightest weight for Florescent Wraps around.

You can wrap a dozen arrows in less than 10 minutes.  

  Just peel and stick. Then easily attach your vanes or feathers with your favorite adhesive. It's that easy.

1" wide will wrap a standard carbon arrow or an Aluminum arrow that is 20xx or small.

If you are not sure of the width you and take the diameter of your shaft and multiply it times 3.142 to get the width.

  Make it easy to find your arrows after the shot. No more endless searches for your arrows!! All vanes adhere to vinyl wraps BETTER than the carbon or aluminum shaft by itself. These are quality vinyl arrow wraps without the high retail price tag. If you want custom sizes just let me know and I will be happy to cut them however you need!!!!!

I highly recommend that you use a flat surface like a mouse pad to roll the wraps onto the shaft!

1) Clean shaft properly before applying wraps. Inexpensive rubbing alcohol works fine. Dry shafts thoroughly.

2) With the wrap pointing toward you and the backing away from you, take your thumb and gently push the edge of the wrap toward you. Peel the wrap from the paper and lay sticky side up on your mouse pad. Align the end of arrow shaft with the end of wrap.

3) Pressing firmly on the shaft, begin to roll the shaft over the arrow wrap moving in a forward motion. (Away from you

4) Simply slide your finger along the seam to assure proper adhesion.

You are now done and it’s as simple as that!




Additional Information

Color Orange

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.