Welcome to Hunt N Stuff !!!!

12(1Dz) Flo / Fluorescent Red Arrow Wraps for Carbon, Wood or Aluminum Shafts

Be the first to review this product

Availability: In stock


Quick Overview

12(1Dz) Flo / Fluorescent Red Arrow Wraps for Carbon, Wood or Aluminum Shafts

12(1Dz) Flo / Fluorescent Red Arrow Wraps for Carbon, Wood or Aluminum Shafts

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

* Required Fields



ONE dozen Fluorescent Red Arrow Wraps

 This Wrap is a Flo Red compared to my other listing that is for Bright Red.

These wraps are lighter than other wraps being sold.

Wraps are ONLY 4 mils thick and weigh about 2 grains per sq inch.

Beware of sellers on eBay that do not give you the mils or weight.

We had a secret shopper purchase other "Bargain" Wrap from eBay and weigh them.
Some were as high as 6 grains per inch.

Also we found some that were based on a water adhesive and not a permanent one.
You do not want the wraps coming off when you arrows get wet!!!!

You can wrap a dozen arrows in less than 10 minutes.

Just peel and stick. Then easily attach your vanes or feathers with your favorite adhesive.

1" wide will wrap a standard carbon arrow or an Aluminum arrow that is 20xx or smaller

If you are not sure of the width you and take the diameter of your shaft and multiply it time 3.142 to get the width.

Make it easy to find your arrows after the shot. No more endless searches for your arrows!! All vanes adhere to vinyl wraps BETTER than the carbon or aluminum shaft by itself.

  These are quality vinyl arrow wraps without the high retail price tag.


I highly recommend that you use a flat surface like a mouse pad to roll the wraps onto the shaft!

1) Clean shaft properly before applying wraps. Inexpensive rubbing alcohol works fine. Dry shafts thoroughly.

2) With the wrap pointing toward you and the backing away from you, take your thumb and gently push the edge of the wrap toward you. Peel the wrap from the paper and lay sticky side up on your mouse pad. Align the end of arrow shaft with the end of wrap.

3) Pressing firmly on the shaft, begin to roll the shaft over the arrow wrap moving in a forward motion. (Away from you

4) Simply slide your finger along the seam to assure proper adhesion.


You are now done and it’s as simple as that!




Additional Information

Color red

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.